Oil mist separator type OUPC 2000 - 4040

Compakt multi-stage filter for cooling lubricants for floor mounting. For filtration of oil mist, emulsion mist, minimal quantity lubrication and oil smoke.

Decentralized oil mist filter for extraction from processing machines. The 4 filter stages ensure optimized filtration from oil smoke to oil mists. Oil mist separator can be placed close to the processing machine with larger air volume requirements. Separation degree min. 99.95% of all cooling lubricants.

H13

Filter class

Product Features

The polluted air is led into the bottom of the separator to the separation chamber for air distribution and densification
The accumulated particles are led on to the washable pore filter PPi35 (50% higher efficiency than alu-grease filter)
Then the air is fine-filtered in cartridge filter type G104A. Separation degree >99% of particles above 0.1µm
Below the first two filter stages a fluid reservoir with ½”-drain cock is located
Last filter stage is a HEPA-filter, filter class H13 that ensures removal of >99.95% smoke particles down to 0.1µm

Product Highlights

Quick and fast service of pre-filter by front door

Pre-filter
Fan integrated in sound enclosure with service door

Integrated fan
DIN-cartridge G104A is easily top-mounted

DIN-cartridge
The 3 primary filter stages are monitored by differential pressure manometers

Differential pressure control

Capacities

Air volume 2000 / 2020:	Up to 2,000m³/h
Air volume 4000 / 4040:	Up to 4,000m³/h

All-round unit with low operating costs

The 4-stage separator principle in OUPC ensures the optimale filtration solution, regardless the type of cooling lubricants, since every filter stage represents the optimale filter principle for each of the primary types of mists: oil mist, emulsion mist, minimal quantity lubrication and oil smoke.

The large surface of the washable pre-filter and self-draining filter cartridge ensure long service life and low pressure loss, which minimize costs for energy and filter replacements. The high separation degree of the third filter stage ensures very long life.

Compact and space-saving solution

The vertical construction of OUPC 2000 – 4040 provides an especially compact and space-saving filter solution for floor mounting. With integrated fan the piping on the clean air side is also saved (where recirculation is permitted).

Advantages by removal of oil mists directly at the machine

The hazardous effects on breathing and skin are reduced.
Fire risk as well as the risk of oil mist aerosols damaging electronics in the machines are minimized.

Filter material:
Standard	Material	Filtration efficiency
Pre-separation in grease filter	Pore filter 35 open-celled polyurethane foam (washable)	Separated normally up to 30% of particles
Fine filtration in self-draining cartridge filter	Cartridge filter ø325mm, length 330/660mm, G104A polyester/glassfibre	Separated more than 99% of particles over 0.1µm
Fine filtration through HEPA- absolute filter	HS-Mikro SFV High Effeciency Particular Air filter, microfilter (glassfibre) mounted in metal frame	> 99,95% equal to filter class H13 according to DS EN1822

Pressure lost over the individual filter stages

Principle sketch for flow through oil mist separator type OUPC 4040

Construction/surfaceoverflade:

Oil mist separator type OUPC is constructed according to:

Machine Directive 2006/42/EF
EMC Directive 2014/30/EU
Low Voltage Directive 2014/35/EU
Harmonized standards: EN 13854, EN 4414, EN 12100, EN 60204-1, EN ISO 13857
Further standards: ISO 3746

Filter cabinet is made in 2mm black steel plate
Surface powder enamelled RAL 7042/7011 structure

Further is available

Siphon for drain cock

Oil mist filter type OUPC is available in the sizes as stated in the form below.

Please, contact us for assistance in selecting the optimal unit taking into consideration air volume, type and vo-lume of cooling lubricant, operation times etc.

Oil mist separator type OUPC 2000 - 4000

1) Pore filter PPi35, 1x2m (08 179 800)
2) DIN-cartridge ø325x660mm, G104A (08 139 510)
3) 1 pc. Minihelic-differential pressure manometer 0-3kPa (09 500 000) and 2 pcs Minihelic-differential pressure manometer0-0.5kPa (09 500 100)
4) Absolute filter in MDF-frame, HEPA/H13, 610x610x292cm (08 177 000)
5) Absolute filter in metal frame, HEPA/H13, 610x610x292cm (08 177 900)

Oil mist separator type OUPC 2020 - 4040

Unit is in top equipped with a fan type VR, 3x400 VAC, 50Hz, 2800 rpm. The fan type is equipped with closed fan wheel and backward-curved straight self-cleaning blades, static/dynamic balanced according to ISO 14694 (BV3 G 6,3).

1) Pore filter PPi35, 1x2m (08 179 800)
2) DIN-cartridge ø325x660mm, G104A (08 139 510)
3) 1 stk. Minihelic-differential pressure manometer 0-3kPa (09 500 000) og 2 stk Minihelic-differential pressure manometer0-0.5kPa (09 500 100)
4) Absolute filter in MDF-frame, HEPA/H13, 610x610x292cm (08 177 000)
5) Absolute filter in metal frame, HEPA/H13, 610x610x292cm (08 177 900)